Philips HEARTSTART XLT M3500B Instructions For Use Manual page 81

WARNING
M3500B HeartStart XLT Defibrillator/Monitor
Figure 7-1: Charging in Sync Mode
LEAD
HR ALARM
SELECT
78
Pads
150 J
Sync
ENERGY
DISARM
SELECT
If desired, you may increase or decrease the selected energy level after
pressing by pressing
,
level is displayed. The defibrillator charges to the modified energy level
automatically. Wait until the current charge reaches the selected energy
level before proceeding.
5. Make sure no one is touching the patient or anything connected to the
patient. Call out "Clear." Then press
down until the shock is delivered.
The defibrillator shocks with the next detected R-wave.
Defibrillation current can cause operator or bystander injury. Do not touch the
patient, or equipment connected to the patient, during defibrillation.
Delivering a Synchronized Shock
SpO2
87 J
Shocks:0
00:00:8
repeatedly until the desired energy
and continue to hold
7
7-3