Setting Alarms; Responding To An Alarm - Philips HEARTSTART XLT M3500B Instructions For Use Manual

Setting Alarms

WARNING
5-8
Setting Alarms
An alarm may be set to alert you if the SpO
lower limit. Lower limit alarm choices are
repeatedly to cycle through the choices. Stop when the desired choice is
displayed. A appears in three seconds, indicating that the selected alarm is
active. To review the alarm limit, press
SpO alarms are temporarily suspended in AED Mode during ECG analysis or when
2
is pressed (for the duration of the paused period). SpO
pended while charging for defibrillation and delivering a shock.

Responding to an Alarm

When the SpO value falls below the alarm limit, a continuous tone alerts you
2
and the SpO value is displayed in inverse video.
2
Figure 5-4 SpO Alarm Triggered
2
LEAD
HR ALARM
SELECT
78
Pads
Monitoring Rhythm
ANALYZE
PAUSE
Press to turn off the alarm. Refer to "Setting Alarms" if subsequent
alarms are desired.
value falls below a specified
2
(no alarm), 90, 85, or 80. Press
.
SpO2
87
PR 80
Shocks: 3
00:00:49
alarms are also sus-
2
Monitoring SpO
2