Marking Events
NOTE
9-2
Marking Events
Mark
The
button allows you to annotate the ECG strip at the point in time the
Event
button is pressed. In AED Mode, when monitoring is disabled, the event is
marked with a
. In Manual Mode, or when monitoring is enabled in AED
Mode, you use the softkeys to select the annotation from the choices dis-
played (See Figure 9-1)*. If no selection is made, the event is marked with a
.
Figure 9-1 Annotations
ATRO
EPI
72
Pads
150 J
CHARGE
ENERGY
SELECT
*In Australia and the U.K.,
The marked event is stored in the Event Summary. If the printer is configured
to
, an ECG strip prints when
configured to
ceding the event and 3 seconds following the event. If
3 second ECG strip prints in real time. To stop printing before the entire strip
Print
is printed, press
Strip
LIDO
OTHER
Shocks:0
00:00:8
is replaced by
Mark
Event
, the strip is 9 seconds and includes 6 seconds pre-
.
(adrenaline).
is pressed. If the printer is
is configured, a
Storing, Retrieving & Printing