Connecting The Pads Patient Cable - Philips HEARTSTART XLT M3500B Instructions For Use Manual

Connecting/Disconnecting Patient Cables
Pads connector
10-2

Connecting the Pads Patient Cable

To connect the pads patient cable to the defibrillator:
1. Align the white pointer on the pads patient cable with the white arrow on
the defibrillator's pads connector, as shown in Figure 10-1.
2. Insert the patient cable into the pads connector. Push until you hear it
click in place.
Figure 10-1 Pads Patient Cable Connector
Setting Up and Configuring the HeartStart XLT
Pointer