Configuring the HeartStart XLT
10-16
Saving Settings to a Data Card
Configuration settings may be saved to a Data Card and used to load the same
configuration into other HeartStart XLTs or to restore the configuration, if
necessary.
To save the configuration:
1. Make sure a Data Card is in the HeartStart XLT before turning the unit on.
2. Select
3. Press
in response to the question
The HeartStart XLT saves the configuration settings to the Data Card and
returns to the main configuration menu.
Loading Settings from a Data Card
To load configuration settings:
1. Make sure a Data Card is in the HeartStart XLT.
2. Select
3. Press
in response to the question
The HeartStart XLT loads the configuration settings from the Data Card and
returns to the main configuration menu.
Printing Settings
To print the configuration settings, select
uration menu.
from the main configuration menu.
from the main configuration menu.
Setting Up and Configuring the HeartStart XLT
.
.
from the main config-