Disconnecting The Pads Patient Cable - Philips HEARTSTART XLT M3500B Instructions For Use Manual

M3500B HeartStart XLT Defibrillator/Monitor

Disconnecting the Pads Patient Cable

To disconnect the pads patient cable:
1. Rotate the green locking mechanism on the patient cable in the direction
(clockwise), of the blue arrow on the defibrillator until it stops (as shown
in Figure 10-2).
2. Hold the locking mechanism in this position as you pull the patient cable
away from the defibrillator.
Figure 10-2 Disconnecting the Pads Patient Cable
Blue arrow
Connecting/Disconnecting Patient Cables
10
10-3