Inserting A Data Card - Philips HEARTSTART XLT M3500B Instructions For Use Manual

Using a Data Card
2-12

Inserting a Data Card

To insert a Data Card:
1. Make sure the HeartStart XLT is powered off.
2. Press up on the release latch to open the door to the Data Card compart-
ment.
3. If a Data Card is already in the compartment, press the black button inside
the compartment to eject the card (see Figure 2-8). Then pull the card out.
4. With the yellow label facing up and the
Start XLT, slide the Data Card into the compartment.
5. Close the Data Card compartment door. Make sure that you hear a click,
indicating that the door is latched shut.
Figure 2-8 Inserting a Data Card
Eject
pointing towards the Heart-
Getting Started