Decode Aiming Pattern - Motorola Symbol MS4404 Integration Manual

Decode Aiming Pattern

Parameter # F0h, 32h
This parameter only applies when in Decode Mode. Select Enable Decode Aiming Pattern to project the aiming
pattern during bar code capture, or Disable Decode Aiming Pattern to turn the aiming pattern off.
NOTE With Picklist Mode on page 6-8
Aiming Pattern is disabled.
*
Enable Decode Aiming Pattern
(02h)
enabled, the decode aiming pattern flashes even when the Decode
Disable Decode Aiming Pattern
Imager Preferences
(00h)
7 - 7