Motorola Symbol MS4404 Integration Manual page 30

2 - 4 Symbol MS4404/MS4407 Integration Guide
Mounting the Stand (optional)
You can attach the base of the stand to a flat surface using two screws or double-sided tape (not provided).
Screw Mount
Position the assembled base on a flat surface.
1.
Screw one #10 wood screw into each screw-mount hole until the base of the stand is secure.
2.
Tape Mount
Peel the paper liner off one side of each piece of tape and place the sticky surface over each of the three
1.
rectangular tape areas.
Peel the paper liner off the exposed sides of each piece of tape and press the stand on a flat surface until it is
2.
secure.
Two screw-mount holes
Mounting the Stand
Figure 2-3
Double-sided tape
areas (3 places)
(dimensions = 1" x 2")