Accessories - Motorola Symbol MS4404 Integration Manual

Accessories

Motorola offers the following accessories for the MiniScan imager. Refer to Solution Builder (ordering guide).
MiniScan Imager Accessories
Table 2-4
Power Supplies*
110V power supply, US
220V power supply, Europe
100V power supply, Asia
264V Universal power supply
(also order cables below)
DC line cord (power supply to imager)
AC line cord (wall outlet to power supply)
RS-232
Female DB9 with straight connector to RS-232 host
(female DB9), with trigger jack and no beeper
Female DB9 with straight connector to RS-232 host
(female DB9), with trigger jack and beeper*
Female DB9 with straight connector to RS-232 host
(female DB9)
Female DB9 with straight connector to RS-232 host
(female DB9), with trigger jack and no hardware
handshaking
USB
Female DB9 with straight connector with trigger jack
and beeper to USB (Type A connector)
Female DB9 straight to USB
Cable Adapters
Female 25 pin D, TxD on pin 2
Female 25 pin D, TxD on pin 3
Male 25 pin D, TxD on pin 2
Male 25 pin D, TxD on pin 3
*For power, connect this device to a limited power source.
Note: DO NOT use cables with an integrated beeper when operating at 12 VDC.
Accessory Standard Part Number
KT-14001-001R
(replaces 50-14000-008)
50-14000-009
50-14000-010
50-14001-001
50-16002-009
23844-00-00
25-13227-XX
25-13228-XX
25-58918-XX
25-63736-XX
25-58925-XX
25-58926-XX
50-12100-378
50-12100-377
50-12100-380
50-12100-379
Getting Started 2 - 11
ROHS Part Number
KT-14001-001R
(replaces 50-14000-008R)
50-14000-009R
50-14000-010R
50-14001-001R
50-16002-009R
N/A
25-13227-XXR
25-13228-XXR
25-58918-XXR
25-63736-XXR
25-58925-XXR
25-58926-XXR
N/A
N/A
N/A
N/A