Image Brightness (Target White); Jpeg Image Options - Motorola Symbol MS4404 Integration Manual

Image Brightness (Target White)

Parameter # F0h 86h
Type: Byte
Range: 1 - 240
This parameter sets the Target White value used in Snapshot, Video, and Video Viewfinder mode when using auto
exposure. White and black are defined as 255 decimal and 0, respectively. If you set the value to the default of 180,
the white level of the image should be ~180.
To set the Image Brightness parameter, scan Image Brightness below followed by three numeric bar codes
representing the value. Leading zeros are required. For example, to set an Image Brightness value of 99, scan 0,
9, 9. See Appendix D, Numeric Bar Codes
*
180

JPEG Image Options

Parameter # F0h, 2Bh
Optimize JPEG images for either size or for quality. Capture the Quality Selector bar code to enter a quality value;
the imager then selects the corresponding image size. Capture the Size Selector bar code to enter a size value;
the imager then selects the best image quality.
*
JPEG Quality Selector
(01h)
for numeric bar codes.
Imager Preferences 7 - 17
Image Brightness
(3 digits)
JPEG Size Selector
(00h)