Decoding Preferences; Decoding Illumination; Decode Aiming Pattern - Motorola Symbol DS6608 Product Reference Manual

Decoding Preferences

The parameters in this chapter control bar code decoding characteristics.

Decoding Illumination

Parameter # F0h, 2Ah
Selecting Enable Illumination causes the digital scanner to flash illumination to aid decoding. Select Disable Illumination to prevent
the digital scanner from using decoding illumination.
Enabling illumination usually results in superior images. The effectiveness of the illumination decreases as the distance to the target
increases.
*Enable Decoding Illumination

Decode Aiming Pattern

Parameter # F0h, 32h
This parameter only applies when in Decode Mode. Select Enable Decode Aiming Pattern to project the aiming pattern during bar
code capture, or Disable Decode Aiming Pattern to turn the aiming pattern off.
With picklist enabled, the decode aiming pattern flashes even when the Decode Aiming Pattern is
disabled.
Note
*Enable Decode Aiming Pattern
(01h)
(02h)

Decoding Preferences 5-5

Disable Decoding Illumination
(00h)
Disable Decode Aiming Pattern
(00h)