Chapter 9 RS-232 (TTL Serial) Interface
Overview
This chapter describes how to set up the Symbol MS440X with a serial host. Use the serial interface to connect the
Symbol MS440X to point-of-sale devices, host computers, or other devices with an available serial port (e.g., com
port).
If your host does not appear in
parameters to match the host.
NOTE The Symbol MS440X uses RS-232C signal levels.
Throughout the programming bar code menus, asterisks (
.
NOTE Most computer monitors allow capturing the bar codes directly on the screen. When capturing from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces do not merge.
Table
9-2, refer to the documentation for the host device to set communication
*
*
Baud Rate 57,600
Indicates Default
*
) indicate default values.
Feature/Option