Event Reporting; Decode Event - Motorola Symbol MS4404 Integration Manual

8 - 20 Symbol MS4404/MS4407 Integration Guide

Event Reporting

The host can request the decoder to provide certain information (events) relative to the decoder's behavior. Enable
or disable the events listed in
Event Codes
Table 8-4
Event Class

Decode Event

Boot Up Event
Parameter Event
Decode Event
Parameter # F0h, 00h
If you enable this, the decoder generates a message to the host when it successfully decodes a bar code. Disable
this to send no notification.
Enable Decode Event
Table 8-4 and on the following pages by scanning the appropriate bar codes.
Non parameter decode
System power-up
Parameter entry error
Parameter stored
Defaults set (and parameter event is enabled by default)
Number expected
(01h)
Event
*Disable Decode Event
Code Reported
0x01
0x03
0x07
0x08
0x0A
0x0F
(00h)