Host Serial Response Time-Out - Motorola Symbol MS4404 Integration Manual

9 - 14 Symbol MS4404/MS4407 Integration Guide

Host Serial Response Time-out

This parameter specifies how long the imager waits for an ACK, NAK, or CTS before determining that a
transmission error occurred. This only applies when in one of the ACK/NAK software handshaking modes, or in
RTS/CTS hardware handshaking mode.
*
Minimum: 2 Sec
Low: 2.5 Sec
Medium: 5 Sec
High: 7.5 Sec
Maximum: 9.9 Sec