Motorola Symbol MS4404 Integration Manual page 383

Modifier Characters (Continued)
Table B-3
Code Type
MSI
D 2 of 5
UPC/EAN
Bookland EAN
ISSN EAN
Code 11
GS1 DataBar Family
Option Value
0 Check digits are sent.
1 No check digit is sent.
Example: An MSI bar code 4123, with a single check digit checked, is
transmitted as ]M14123
0 No options specified at this time. Always transmit 0.
Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123
0 Standard packet in full EAN country code format, which
is 13 digits for UPC-A, UPC-E, and EAN-13
(not including supplemental data).
1 Two-digit supplement data only.
2 Five-digit supplement data only.
3 Combined data packet comprising 13 digits from a
UPC-A, UPC-E, or EAN-13 symbol and 2 or 5 digits from
a supplemental symbol.
4 EAN-8 data packet.
Example: A UPC-A bar code 012345678905 is transmitted as
]E00012345678905
0 No options specified at this time. Always transmit 0.
Example: A Bookland EAN bar code 123456789X is transmitted as
]X0123456789X
0 No options specified at this time. Always transmit 0.
Example: An ISSN EAN bar code 123456789X is transmitted as
]X0123456789X
0 Single check digit
1 Two check digits
3 Check characters validated but not transmitted.
No option specified at this time. Always transmit 0.
DataBar-14 and DataBar Limited transmit with an
Application Identifier "01".Note: In GS1-128 emulation
mode, GS1 DataBar is transmitted using Code 128 rules
(i.e., ]C1).
Example: A GS1 DataBar-14 bar code 0110012345678902 is transmitted as
]e00110012345678902.
Programming Reference
Option
B - 5