Host Rts Line State; Decode Data Packet Format - Motorola Symbol MS4404 Integration Manual

Host RTS Line State

Parameter # 9Ah
This parameter sets the expected idle state of the Serial Host RTS line.
The SSI Interface is used with host applications which also implement the SSI protocol. However, you can also use
the decoder in a "scan-and-transmit" mode to communicate with any standard serial communication software on a
host PC (see Decode Data Packet Format on page
may be asserting hardware handshaking lines which interfere with the SSI protocol. Scan the Host: RTS High bar
code to address this problem.
*Host: RTS Low
(00h)

Decode Data Packet Format

Parameter # EEh
This parameter selects whether to transmit decoded data in raw format (unpacketed), or with the packet format
defined by the serial protocol.
Selecting the raw format disables ACK/NAK handshaking for decode data.
*Send Raw Decode Data
(00h)
8-15). If transmission errors occur in this mode, the host PC
Host: RTS High
Send Packeted Decode Data
SSI Interface 8 - 15
(01h)
(01h)