11 - 38 Symbol MS4404/MS4407 Integration Guide
Code 11
Code 11
Parameter # 0Ah
To enable or disable Code 11, capture the appropriate bar code below.
Enable Code 11
Set Lengths for Code 11
Parameter # L1 = 1Ch, L2 = 1Dh
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific
range.
•
One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length.
Select the length using the numeric bar codes in
only Code 11 symbols with 14 characters, capture Code 11 - One Discrete Length, then capture 1 followed
by 4. To correct an error or to change the selection, capture Cancel on
•
Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
example, to decode only Code 11 symbols containing either 2 or 14 characters, select Code 11 - Two
Discrete Lengths, then capture 0, 2, 1, and then 4. To correct an error or to change the selection,
capture Cancel on
•
Length Within Range - Select this option to decode a Code 11 symbol with a specific length range.
Select lengths using numeric bar codes in
Code 11 symbols containing between 4 and 12 characters, first capture Code 11 - Length Within Range.
Then capture 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change
the selection, capture Cancel on
•
Any Length - Capture this option to decode Code 11 symbols containing any number of characters within
the imager's capability.
(01h)
page
D-3.
page
*
Appendix D, Numeric Bar
Appendix D, Numeric Bar
Appendix D, Numeric Bar Codes.
D-3.
Disable Code 11
(00h)
Codes. For example, to decode
page D-3.
Codes. For
For example, to decode