4 - 30 DS3508 Product Reference Guide
Hand-Held Decode Aiming Pattern
Parameter # F0h, 32h
Select Enable Hand-Held Decode Aiming Pattern to project the aiming pattern during bar code capture, Disable
Hand-Held Decode Aiming Pattern to turn the aiming pattern off, or Enable Hand-Held Decode Aiming Pattern
on PDF to project the aiming pattern when the digital scanner detects a 2D bar code.
This parameter does not apply to Snapshot Mode. See
NOTE With
Aiming Pattern is disabled.
*
Enable Hand-Held Decode Aiming Pattern
Enable Hand-Held Decode Aiming Pattern on PDF
NOTE Picklist Mode temporarily over-rides the Disable Decode Aiming Pattern option. The Decode Aiming
Pattern cannot be disabled when the following options are selected:
•
•
•
Picklist Mode on page 4-24
(02h)
(03h)
Smart LED Mode is set to Enable (DS3508-ER configuration)
Focus Mode is set to Auto-Ranging (DS3508-ER configuration)
Picklist Mode is set to Enable (DS3508-ER and DS3508-SR configurations)
Operational Modes on page
enabled, the decode aiming pattern flashes even when the Decode
Disable Hand-Held Decode Aiming Pattern
5-4.
(00h)