Fn1 Substitution Values - Motorola Symbol MS4404 Integration Manual

Hide thumbs Also See for Symbol MS4404:
Table of Contents

Advertisement

12 - 6 Symbol MS4404/MS4407 Integration Guide
Scan Data Transmission Format (continued)
<PREFIX> <DATA> <SUFFIX 2>

FN1 Substitution Values

Key Category Parameter # 67h
Decimal Value Parameter # 6Dh
The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature. Enabling this substitutes any FN1
character (0x1b) in a GS1-128 bar code with a value. This value defaults to 7013 (Enter Key).
When using host commands to set the FN1 substitution value, set the key category parameter to 1, then set the
3-digit keystroke value. See the
value.
To select a FN1 substitution value via bar code menus:
Capture the bar code below.
1.
Look up the keystroke desired for FN1 Substitution in the ASCII Character Set table for the current host
2.
interface. Enter the 4-digit ASCII value by capturing each digit in
To correct an error or change the selection, capture Cancel on page D-3.
To enable FN1 substitution for USB HID keyboard, capture the Enable FN1 Substitution bar code on
(06h)
Appendix E, ASCII Character Sets
Set FN1 Substitution Value
<PREFIX> <DATA> <SUFFIX 1>
(05h)
<PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2>
(07h)
for the current host interface for the desired
Appendix D, Numeric Bar
Codes.
page
12-6.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Symbol ms4407

Table of Contents