6 - 10 Symbol DS3407 Product Reference Guide
Host Serial Response Time-out
Parameter # 9Bh
This parameter specifies how long the digital scanner waits for an ACK or NAK before resending. Also, if the
scanner wants to send, and the host was already granted permission to send, the decoder waits for the designated
time-out before declaring an error.
To set the delay period (options are 2, 5, 7.5, or 9.9 seconds), scan one of the following bar codes.
NOTE Other values are available via SSI command.
*Low - 2 Seconds
High - 7.5 Seconds
(14h)
(4Bh)
Medium - 5 Seconds
(32h)
Maximum - 9.9 Seconds
(63h)