Rts Line State; Stop Bit Select - Motorola Symbol LS9208 Product Reference Manual

RTS Line State

This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High
RTS line state.

Stop Bit Select

The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and
prepares the receiving device for the next character in the serial data stream. Select the number of stop bits (one or
two) to match the number the receiving host is programmed to accommodate.
*
Host: Low RTS
Host: High RTS
*
1 Stop Bit
2 Stop Bits
RS-232 Interface 6 - 17