3.6
Removal of Piano Jacks
1.
S Remove the piano jack strapping and care
fully pull the piano jacks away from the unit.
S Remove all material used for panel protec
tion.
S Unit is now resting on the wood spacer
boards.
2.
S Lower the four (4) stabilizer feet so that they
are in contact with the ground. Use either a
15/16" openend wrench, or pliers. Fit the tool
into openings in the ends of the base.
S Turn the stabilizer feet one (1) to two (2) addi
tional turns removing the unit weight from
the wood spacer boards.
S Remove the wood spacer boards from under
the unit.
S Slowly lower the unit using the stabilizer feet,
so the unit castors are on the ground.
3.
S Open top panel door with the mounted con
trol.
S Locate bottom baffle panel assembly and
reattach to the unit with screws using a
standard screw driver.
S Close and latch top panel door.
4.
S Using the unit castors, at least two (2) trained
personnel can move the unit to the site for in
stallation.
16
Unpacking and installation