Menù
4.7
CYCLE COUNTING menu
You can use this function to check how many complete cycles (opening-closing) the system has performed
from first installation.
Press button
and use
then press button
Use
EMERGENCY STOP terminals
1
Use
2
Press button
The display shows the number of complete opening and closing cycles of the gate.
4
Press button
then press button
or wait the timeout (20 seconds) to exit.
29
to enter the CYCLE COUNTING menu: display will show
buttons to scroll the lower level menus:
buttons to move inside the menu, till the display shows:
to confirm.
to go back to the top level menus,
again till the display shows:
to select menu
,
Q80A_8_2017