Obstacle Detection Adjustment - Motor1; Obstacle Detection Adjustment - Motor 2 - Proteco Q80A Instruction Manual

OBSTACLE DETECTION adjustment - MOTOR 1
1 Use
2 Press button
The display now shows the current sensibility level for the obstacle detection of Motor 1:
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.

OBSTACLE DETECTION adjustment - MOTOR 2

1 Use
2 Press button
The display now shows the current sensibility level for the obstacle detection of Motor 2:
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.
N.B.:
NOTE: If OBSTACLE DETECTION is too sensitive, causing unexpected stops or reversal of leaves, you need to
re-adjust and
Q80A_8_2017
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY
buttons to move inside the menu, till the display shows:
to confirm.
buttons to change the Motor 1 sensibility level
to go back to the top level menus,
again till the display shows:
buttons to move inside the menu, till the display shows:
to confirm.
buttons to change the Motor 2 sensibility level.
to go back to the top level menus,
again till the display shows:
settings to a lower level.
Tel. +39 0173 210111 - Fax +39 0173 210199
....
(max)
....
(max)
info@proteco.net - www.proteco.net
(OFF)
(min)
(OFF)
(min)
18