Force Menu; Torque/Power Adjustment - Motor1; Torque/Power Adjustment - Motor 1 - Proteco Q80A Instruction Manual

4.3

FORCE menu

Use this menu to adjust the sensibility level of the obstacle detection in case of AUTOMATIC Programming mode (
or to adjust the motors force in case of SEQUANTIAL Programming mode (
Press button and use
then press button
Use buttons to scroll the lower level menus:

TORQUE/POWER adjustment - MOTOR 1

1 Use
2 Press button
The display now shows the current torque/power level for Motor 1:
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.
TORQUE/POWER adjustment - MOTOR 2
1 Use
2 Press button
The display now shows the current torque/power level for Motor 2:
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.
17
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY
to select menu
to enter the FORCE menu: display will show
buttons to move inside the menu, till the display shows:
to confirm.
buttons to change the Motor 1 torque/power level.
to go back to the top level menus,
again till the display shows:
buttons to move inside the menu, till the display shows:
to confirm.
buttons to change the Motor 2 torque/power level.
to go back to the top level menus,
again till the display shows:
Tel. +39 0173 210111 - Fax +39 0173 210199
).
,
info@proteco.net - www.proteco.net
)
(min)
....
(max)
(min)
....
(max)
Q80A_8_2017