Automatic Closing Pause Time; Pedestrian Closing Pause Time; Operating Time - Proteco Q80A Instruction Manual

AUTOMATIC CLOSING Pause time

Use this menu set the pause time for the Automatic Closing (from 0 to 99 seconds).
1 Use
2 Press button
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.
PEDESTRIAN AUTOMATIC CLOSING Pause time
Use this menu set the pause time for the Pedestrian Automatic Closing (from 0 to 99 seconds).
1 Use
2 Press button
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.
OPERATING TIME – Motor 1
Use this menu to adjust Motor 1 opening/closing.
Use only with the SEQUENTIAL Programming mode -
In AUTOMATIC programming mode
1 Use
2 Press button
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.
25
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY
buttons to move inside the menu, till the display shows:
to confirm.
buttons to set the pause time for automatic closing:
to go back to the top level menus,
again till the display shows:
buttons to move inside the menu, till the display shows:
to confirm.
buttons to set the pause time for Pedestrian automatic closing:
to go back to the top level menus,
again till the display shows:
, working time of MOTOR 1 can't be changed
buttons to move inside the menu, till the display shows:
to confirm.
buttons to reduce/increase Motor 1 operating time:
to go back to the top level menus,
again till the display shows:
Tel. +39 0173 210111 - Fax +39 0173 210199
(OFF)
....
....
....
Q80A_8_2017
info@proteco.net - www.proteco.net
(max)
(OFF)
(max)
(max)