Pedestrian Opening Time - Proteco Q80A Instruction Manual

DECELERATION TIME - Motor 2
Use this setting to adjust opening/closing deceleration time for Motor 2 (from 1 to 10 seconds).
Before adjusting this setting, please make sure that parameter
= Deceleration ON
1 Use
2 Press button
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.

PEDESTRIAN OPENING TIME

Use this setting to adjust operating time for Pedestrian Opening for Motor 1 (from 1 to 12 seconds).
1 Use
2 Press button
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.
27
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY
buttons to move inside the menu, till the display shows::
to confirm.
buttons to reduce/increase Motor 2 deceleration time:
to go back to the top level menus,
again till the display shows:
buttons to move inside the menu, till the display shows:
to confirm.
buttons to set Motor 1 Pedestrian opening time:
to go back to the top level menus,
again till the display shows:
Tel. +39 0173 210111 - Fax +39 0173 210199
in FUNCTIONS menu is:
info@proteco.net - www.proteco.net
(OFF)
(min)
.... ....
(max)
(total opening)
(min)
....
(max)
Q80A_8_2017