4.2.2 Restoring Default Settings; Ram Opener Default Settings; Articulated Arm Opener Default Settings; Wheel-Driven Opener Default Settings - Proteco Q80A Instruction Manual

4.2.2 Restoring DEFAULT SETTINGS

The control panel comes with pre-set working parameters according to the automation model used.
You can reset the control panel to the default settings as follows:

RAM opener default settings

1 Use
2 Press and hold button
3 Press button
then press button
or wait the timeout (20 seconds) to exit.

ARTICULATED ARM opener default settings

1 Use
Press and hold button
2
3 Press button
then press button
or wait the timeout (20 seconds) to exit.

WHEEL-DRIVEN opener default settings

1 Use
2 Press and hold button
3 Press button
then press button
or wait the timeout (20 seconds) to exit.
Q80A_8_2017
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY
buttons to move inside the menu, till the display shows:
for about 5 seconds.
to go back to the top level menus,
again till the display shows:
buttons to move inside the menu, till the display shows:
for about 5 seconds.
to go back to the top level menus,
again till the display shows:
buttons to move inside the menu, till the display shows:
for about 5 seconds.
to go back to the top level menus,
again till the display shows:
Tel. +39 0173 210111 - Fax +39 0173 210199 info@proteco.net - www.proteco.net
16