Functions Menu; Multi-Occupation; Pre-Blinkin - Proteco Q80A Instruction Manual

4.4

FUNCTIONS menu

Use this menu to enable/disable special settings.
= function is ON
= function is OFF
Press button and use
then press button
Use buttons to scroll the lower level menus:
MULTI-OCCUPATION Function
This function grants priority to the opening command; when two people activate the gate
at the same time the first opening command prevails, while opening the control panel ignores
any further command.
1 Use
2 Press button
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.
PRE-BLINKING Function
This function makes the flashing light pre-blinking for 4-5 seconds before the gate starts opening.
1 Use
2 Press button
3 Use
4 Press button
then press button
or wait the timeout (20 seconds) to exit.
19
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY
to select menu
to enter the FUNCTIONS menu: display will show
buttons to move inside the menu, till the display shows:
to confirm.
buttons to select:
to go back to the top level menus,
again till the display shows:
buttons to move inside the menu, till the display shows:
to confirm.
buttons to select:
to go back to the top level menus,
again till the display shows:
Tel. +39 0173 210111 - Fax +39 0173 210199
,
MULTI-OCCUPATION Function OFF
MULTI-OCCUPATION Function ON
PRE-BLINKING Function OFF
PRE-BLINKING Function ON
info@proteco.net - www.proteco.net
Q80A_8_2017