Troubleshooting Functions - NEC NEFAX 671 Service Manual

8-4.

Troubleshooting Functions

Scan to E-Mail Transmission
No. Condition
1 Transmission is not
possible.
2 Transmission is
possible, but the
image cannot be
outputted at the
recipient's terminal
or computer.
Internet Fax Transmission
No. Condition
1 Transmission is not
possible.
2 An interruption in
the transmission
was specified, but
the transmission
was not inter-
rupted.
Cause
The connections are
incorrect.
The settings necessary
for the device are not reg-
istered.
The LAN cable is dam-
aged.
The recipient's terminal is
not able to handle the
sent image.
The document text was
not inserted when the
data was sent.
Cause
The connections are
incorrect.
The settings necessary
for the device are not reg-
istered.
The LAN cable is dam-
aged.
It takes some time to
interrupt an Internet fax
transmission.
T-47
Action
Check the LED indicator on the
hub, and check the connections.
Specify the necessary network set-
tings.
Replace the LAN cable.
Change the size, resolution and
coding method so that they are sup-
ported by the recipient's terminal,
and then try sending the data again.
With some e-mail applications, if an
e-mail is received containing no text
and only an attached file, it may not
be possible to open the attached
file. Therefore, text should be
inserted into the document that is
sent.
Action
Check the LED indicator on the
hub, and check the connections.
Specify the necessary network set-
tings.
Replace the LAN cable.
Wait until the transmission is inter-
rupted.