List Of Communication Error Codes - NEC NEFAX 671 Service Manual

8-5.

List of Communication Error Codes

• The following error codes appear in TX Result Report, RX Result Report.
Error code
0072 A connection to the SMTP server cannot be established.
Communication is not possible because of some problem in the machine
0073
or the condition of the network or SMTP Server.
0074 The connection to the SMTP server was cut.
The memory of the SMTP server has become full while sending an e-
0075
mail.
007B The connection is disconnected during gateway transmission.
A Direct fax that cannot be forward transmit by this machine was
007C
received. (For a file attachment in a format other than TIFF-F)
While receiving a Direct fax, the size of the data for the scanned image
007D
has exceeded the capacity of the memory.
While receiving a Direct fax, the maximum of number of managed mem-
007E
ory file is used.
0096 The IP address could not be assigned by the DNS server.
0097 The IP address could not be assigned by the DNS server.
0098 The IP address could not be assigned by the DNS server.
009B A connection to the DNS server cannot be established.
While receiving an e-mail, the maximum of number of managed memory
00a2
file is used.
00a3 A connection to the POP3 server cannot be established.
The password is incorrect, so the machine could not log onto the POP3
00a4
server.
Communication is not possible because of some problem in the machine
00a5
or the condition of the network or POP Server.
00a6 The connection to the POP3 server was cut.
An e-mail that cannot be printed by this machine was received. (For a file
00a7
attachment in a format other than TIFF-F)
While receiving an e-mail, the size of the data for the scanned image has
00a8
exceeded the capacity of the memory.
00A9 A connection to the FTP server cannot be established.
The password is incorrect, so the machine could not log onto the FTP
00AA
server.
Communication is not possible because of some problem in the machine
00AB
or the condition of the network or FTP Server.
00AC The connection to the FTP server was cut.
00AD The FTP server cannot store the data that is sent from the machine.
Description
T-51