Counter Function; Counter - NEC NEFAX 671 Service Manual

Function
TEST
To adjust for variations in the accu-
COPY
racy of ADF and their mounting
ADF
accuracy by varying the scanning
SUB
zoom ratio in the sub-scanning
ZOOM
ADJUST
direction.
TEST
To adjust for variations in the accu-
COPY
ADF racy of ADF and their mounting
MAIN accuracy by varying the scanning
REGIST start position in the main scanning
ADJUST
direction.
TEST
To adjust for variations in the accu-
COPY
ADF racy of ADF and their mounting
SUB accuracy by varying the scanning
REGIST start position in the sub-scanning
ADJUST
direction.
Save the Shading value .When the
SHAD- shading page is unclean then
ING ADJUST machine execute the shading will
LEVEL get wrong value, in this time can
use the save shading.
5-6.

Counter Function

• The following counters can be shown on display.
No. Indication on LCD
1 TOTAL COUNTER
2 PM COUNTER
3 I/C COUNTER
4 APPLICATION COUNTER
5 SCAN COUNTER
(1)

Counter

• The counter values can be displayed.
Purpose Setting Details/Precautions
Press the Start key to begin
printing the test page.
• The setting range is 95 (-2.0
%) to 105 (+2.0 %).
• (1 increment = 0.4%)
• The default setting is "100".
Press the Start key to begin
printing the test page.
• The setting range is 90 (-5.0
mm) to 110 (+5.0 mm).
• (1 increment = 0.5 mm)
• The default setting is "100".
Press the Start key to begin
printing the test page.
• The setting range is 90 (-5.0
mm) to 110 (+5.0 mm).
• (1 increment = 0.5 mm)
• The default setting is "100".
• This function is the same with
shading level of the Image
Sensor by using A4 size
white sheet of paper in case
of following condition.
S-70