Memory Clear - NEC NEFAX 671 Service Manual

(3)

Memory clear

• To clear the settings for the functions listed at the right and return the functions to their
default settings.
• The following items are cleared (initialization).
NOTES
• Before executing "SRAM CLEAR," be sure to record the setting values that are to be ini-
tialized through "SRAM CLEAR."
• For the record of the setting values, it is a good idea to have reports and lists printed.
☞ S-11 "Status mode/ Print report"
☞ S-75 "Service mode/ Reporting"
• Some setting values are not included any of these reports or lists. Be sure to make a
note of them separately.
• After "SRAM CLEAR" has been executed, make necessary entries of data again based
on the setting values recorded.
MODE Initialized Items
MACHINE SETTING
PAPER SOURCE
SETUP
ADMIN. MANEGE-
MENT
COPY SETTING
FAX REGISTRATION
UTILITY
MODE
TX OPERATION
RX OPERATION
COMM. SETTING
Default
AUTO PANEL RESET 1
ENERGY SAVE MODE 15MIN.
DENSITY(ADF) MODE1
DENSITY(BOOK) MODE1
PRINT DENSITY 0
LCD CONTRAST 0
BUZZAR VOLUM LOW
INITIAL MODE COPY
TRAY1 PAPER METRIC
A4L/
PLAIN
TRAYSETTING CONTINUOUS
REMOTE MONITOR OFF
PAPER PRIORITY TRAY1
DENSITY PRIORITY AUTO
DENSITY LEVEL(A) 0
DENSITY LEVEL(M) 0
OUTPUT PRIORITY NON
ONE TOUCH DIAL None
SPEED DIAL None
GROUP DIAL None
PROGRAM DIAL None
BATCH TX None
MAIL BOX None
RELAY BOX None
SCAN CONTRAST 0
RESOLUTION STD
DEFAULT TX MEM. TX
HEADER ON
MEMORY RX MODE OFF
NO. of RINGS 2
REDUCTION RX ON
RX PRINT MEMORY RX
RX MODE AUTO RX
FORWARD OFF
FOOTER OFF
SELECT TRAY ENABLE
CLOSED NETWORK\ OFF
LINE MONITOR LOW
PSTN/ PBX PSTN
S-85
Report/ List
MACHINE STATUS LIST
INCH MACHINE STATUS LIST
LETTER/
PLAIN
None
MACHINE STATUS LIST
ONE TOUCH LIST
SPEED DIAL LIST
KEY SETTING LIST
MACHINE STATUS LIST
MACHINE STATUS LIST
MACHINE STATUS LIST
MACHINE STATUS LIST
☞
S-11
☞
S-15
☞
S-11
☞
S-15
None
☞
S-11
☞
S-15
☞
S-11
☞
S-13
☞
S-15
☞
S-11
☞
S-15
☞
S-11
☞
S-15
☞
S-11
☞
S-16