Network Setting - NEC NEFAX 671 Service Manual

(11) Network setting

• Depending on the network environment in which the machine is located, there may be
some restrictions on the network functions that the machine can use. Make the network
settings to suit the functions and environment required for customer's location. The net-
work settings can be specified from the control panel or using the administrator mode of
Power Web Management.
No. Function
This function is used to specify the
IP address for the copier.
NOTES
• Available only NEFAX 691.
• Please consult customer's net-
work administrator for informa-
tion about the IP address to use.
1 IP ADDRESS
Purpose Setting Details/Precautions
• The default setting is
"AUTO".
AUTO
• If AUTO is selected, the IP
address is automatically
acquired from the DHCP
server.
NOTES
• AUTO is only enabled if there
is a DHCP server available
on the network.
• When IP address cannot be
acquired from the DHCP
server, IP address is
acquired by the "Auto-IP
function".
• When AUTO is selected,
there is no need to set the
subnet mask or gateway set-
ting. When using a fixed IP
address, IP Address in
NVRAM must be selected for
Power Web Management.
• Select this option from the
"TCP/IP Configuration" menu
on the "Network" tab.
• If SPECIFY is selected, the
screen for entering the IP
address appears.
S-46
SPECIFY