NEC NEFAX 671 Service Manual page 118

No. Function
3 DENSITY To specify the scanning density
To specify the default print density. • The default setting is "0".
PRINT
4
DENSITY
To specify the brightness of the
LCD CON-
5 display.
TRAST
To set the volume of alarms and
BUZZER
6 the beep sounded when a key is
VOLUME
pressed.
To set the mode (Copy mode or
INITIAL Fax mode) that the machine starts
7
MODE up in or returns to after the Control
Panel is reset.
Purpose Setting Details/Precautions
• The default setting is
"MODE1".
• MODE 1:
For a lighter copy density in
order to reduce the appear-
ance of spots in copies
• MODE 2:
For printing copies with the
same density as the docu-
ment
The setting range is -3 to +3.
• The default setting is "0".
The setting range is -1 to +2.
• The default setting is "LOW".
• HIGHT LOW OFF
• The default setting is FAX.
• FAX
S-23