NEC NEFAX 671 Service Manual page 54

No. Name
1 Control Panel
2 Exit tray
3 Front Door
4 Bypass Tray
5 Tray1
6 Left Cover
7 Right Cover
8 Rear Cover
3-2. Identification of Exterior Parts and Removal Procedures for
(Automatic Document unit)
1
No. Name
Document Feeder
1
Cover
Document Feeder
2 Rear Cover
Document Feeder
3
Tray
Removal Procedure
Remove the three screws, unplug the connector and the
flat cable, and remove the Control Panel.
☞ D-12
While pressing out one side, remove the Exit tray.
Open the Front Door. → While pressing in one side,
remove the Front Door.
–
Hold down the main unit with one hand and pull Tray1 off
toward you.
Open the Front Door. → Remove the one screw, unhook
the eight tabs, and remove the Left Cover.
Open the Front Door. → Remove the two screws, unhook
the four tabs, and remove the Right Cover.
Remove the four screws, and remove the Rear Cover.
2
Removal Procedure
Open the Document Feeder Cover. → Remove the two
screws. → Remove the Document Feeder Cover.
Document Feeder Rear Cover
Remove the two screws.→ Remove the Document
Feeder Rear Cover.
Remove the Document Feeder Tray.
D-8
3
1382D001AB