Table of Contents
Advertisement
8.
Network Error
8-1.
Troubleshooting Procedure Overview
• If it is not possible to transfer data correctly with the various settings made on [NET-
WORK SETTING], the network or telephone line is probably defective.
NOTE
Network setting and line checks should be made by the network administrator (system
administrator).
8-2.
Troubleshooting Procedure Chart
1. If network settings are not correct, check them by following the flowchart below.
Turn on the power switch
The machine does not start up
even if reset is repeated over
and over again.
NO
[NETWORK SETTING] is not
displayed on the "Utility"
screen.
NO
END
YES
Take necessary action according to the trouble
shooting procedures for the machine.
YES
• It takes several minutes for [NETWORK
SETTING] to appear after the power switch
has been turned ON.
• If it does not appear even after you wait for
several seconds, check the Network Inter-
face Card for proper connection. The symp-
tom disappears after the board has been
properly reconnected.
NO
Change the Network Interface Card.
T-45
Advertisement
Chapters
Table of Contents
Troubleshooting
