Main Error Messages And Their Remedies - NEC NEFAX 671 Service Manual

8-3.

Main Error Messages and Their Remedies

Message
*COMM.ERROR*
XXXX SERVER
*CANNOT CONNECT*
XXXX SERVER
*CANNOT GET IP*
XXXX SERVER
*DISCONNECT*
XXXX SERVER
*WRONG PASSWORD*
XXXX SERVER
*RECEIVE WRONG
DATA*
*MEM.FULL/TX CANCEL* While sending an e-mail, the
*MEM.FULL/RX CANCEL*
XXXX SERVER
*FILE.FULL/TX CANCEL* While sending an e-mail, the
*FILE.FULL/RX CANCEL*
XXXX SERVER
*SERVER MEMORY
FULL*
SMTP SERVER
*FTP SERVER ERROR*
Cause
Communication is not possi-
ble because of some problem
in the machine or the condition
of the network or server.
A connection to the server
cannot be established.
The IP address could not be
assigned by the DNS or DHCP
server.
The connection to the server
was cut.
The password is incorrect, so
the machine could not log onto
the server.
An e-mail that cannot be
printed by this machine was
received. (For a file attachment
in a format other than TIFF-F)
size of the data for the
scanned image has exceeded
the capacity of the memory.
While receiving an e-mail, the
size of the data for the
scanned image has exceeded
the capacity of the memory.
maximum of number of man-
aged memory file is used.
While receiving an e-mail, the
maximum of number of man-
aged memory file is used.
The memory of the SMTP
server has become full while
sending an e-mail.
While uploading scan data, the
data could not be correctly
uploaded to the FTP server.
T-46
Remedy
Check the transmission
results.
Consult with the network
administrator.
Check that the Ethernet
cable is correctly connected.
Check the "E-MAIL SET-
TING 1", "E-MAIL SETTING
2" and "NETWORK SET-
TING" settings.
Consult with the network
administrator.
Consult with the network
administrator.
Consult with the network
administrator.
For a POP3 server, check
the "E-MAIL SETTING 2" set-
ting.
Consult with the network
administrator.
Ask the sender to send a
TIFF-F file or text in the cor-
rect format.
Retrieve all received e-mail
stored in the memory.
Retrieve all received e-mail
stored in the memory.
Retrieve all received e-mail
stored in the memory.
Retrieve all received e-mail
stored in the memory.
Consult with the network
administrator.
Please consult your network
administrator for details.