Margin Adjustment (Leading Edge/Trailing Edge/Both Sides - NEC NEFAX 671 Service Manual

(4)

Margin Adjustment (Leading Edge/Trailing Edge/Both Sides)

<Requirement>
A
B
4022D503AA
Mode
Service's Choice
Perform this adjustment in the following cases.
• When the user requests a smaller margin
<Adjustment Procedure>
1. Enter Service's Choice in the Service mode.
2. Select "LEADING EDGE ERASE".
3. Specify the setting.
Setting Overview
To reduce the margin..... Decrease the setting.
To increase the margin..... Increase the setting.
4. Specify settings for the "TRAILING EDGE ERASE" and the "VERTICAL EDGE ERASE"
functions in the same way.
• Specify the amount erased at the leading edge
(width of A), trailing edge (width of B), and both
C
sides (width of C) of the paper.
• Default setting: 4 mm
C
Function Item
Leading Edge Erase
Trailing Edge Erase
Vertical Edge Erase
D-32
Setting Range
0 to 5
1 increment = 1 mm