Set Pc Station; Set Pg/Pc Interface - Siemens SIMATIC PCS 7 Service Manual

Diagnostics in PCS 7
8.18 Diagnostic tools
Information on
Connections
(network adapt‐
er function)
Connections
(network adapt‐
er function)
8.18.2.6

Set PC Station

Call
In the Windows Start menu: Siemens Automation > SIMATIC > SIMATIC NET > Configuration
Settings
Overview
Information on
Configuration
Diagnostic op‐
tions
8.18.2.7

Set PG/PC Interface

Call
Options:
● In the Windows Start menu Siemens Automation > SIMATIC > SIMATIC NET > Set PG/PC
Interface
● SIMATIC Manager via menu command Options > Set PG/PC Interface
Overview
Information on
Time synchroni‐
zation
112
Detailed information
Identification of network
adapter of servers and net‐
work services
Active connections, comput‐
er connections, Ethernet sta‐
tistics
Detailed information
Detected modules
Available options vary
for each module
Detailed information
Status of the synchroniza‐
tion of a PC on the plant bus
(requirement:
PC with communications
processor:
● CP 1613
● CP 1623
● CP 1628)
Called via
Enter "ipconfig -all"
Enter "netstat"
Called via
SIMATIC NET Configura‐
tion Settings folder
SIMATIC NET Configura‐
tion Settings > Select mod‐
ule
Called via
Select interface > Click "Di‐
agnostics" > In the "Time"
group
Service Support and Diagnostics (V8.2)
Service Manual, 03/2016, A5E36200111-AA
Additional information
Help and Support Cen‐
ter
Help and Support Cen‐
ter
Additional information
Configuration
Online help for
Settings; see "Set PC Sta‐
tion" topic
Configuration
Online help for
Settings; see "Set PC Sta‐
tion" topic
Additional information
Online help for Config‐
uration Settings; see
"Set PC Station" topic