On/Off-Delay Mode - Siemens SIMATIC ET 200SP Manual

Modes and Functions

3.5 On/Off-delay mode

3.5 On/Off-delay mode
Definition
The signal pending at the TM Pulse 2x24V DIn.0 digital input is output with an assigned
On/Off-delay at the DQn.A digital output.
Pulse diagram
SW_ENABLE is set, while DIn.0 digital input = 0:
Figure 3-7
46
Output sequence On/Off-delay (at the start DIn.0 digital input = 0)
Technology module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
Manual, 09/2015, A5E35061186-AA