Configuring; Configuration Software - Siemens SIMATIC ET 200SP Manual

Configuring

5.1

Configuration software

Introduction
The TM Pulse 2x24V module is configured and assigned parameters with the configuration
software.
The module's pulse output sequences are controlled and monitored by your program.
System environment
The technology module can be used in the following system environments:
Table 5- 1 Applications of the technology module with PROFINET I/O
Applications Components required
Decentralized opera-
•
tion in an S7-1500
system
•
•
Centralized or decen-
•
tralized operation in
an ET 200SP system
•
Decentralized opera-
•
tion in an S7-300/400
system
•
•
Decentralized opera- PROFINET controller
tion in a PROFINET
•
controller or
PROFIBUS master
•
Technology module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
Manual, 09/2015, A5E35061186-AA
S7-1500 automation
system
ET 200SP decentralized
I/O system
TM Pulse 2x24v
ET 200SP automation
system
TM Pulse 2x24v
S7-300/400 automation
system
ET 200SP decentralized
I/O system
TM Pulse 2x24V
ET 200SP decentralized
I/O system
TM Pulse 2x24V
Configuration software
STEP 7 (TIA Portal):
Device configuration and
parameter settings with
hardware configuration
(HWCN)
STEP 7 (TIA Portal):
Device configuration and
parameter settings with
hardware configuration
(HWCN)
STEP 7 (TIA Portal):
Device configuration and
parameter settings with
hardware configuration
(HWCN)
STEP 7:
Device configuration and
parameter settings with HSP
Engineering system with
GSD file
In your program
Direct access to the control and
feedback interface (Page 110) of the
TM Pulse 2x24V in the I/O data
Direct access to the control and
feedback interface of the TM Pulse
2x24V in the I/O data
Direct access to the control and
feedback interface of the TM Pulse
2x24V in the I/O data
Direct access to the control and
feedback interface of the
TM Pulse 2x24V in the I/O data
5
98