Siemens SIMATIC ET 200SP Manual page 13

● Programmable output response to CPU/master STOP condition.
● Error detection and diagnostics:
– Missing or under voltage L+ supply voltage
– Short-circuit/overload of a digital output
– Short-circuit/under voltage of a sensor power supply
– Over temperature error
– Parameterization fault
– Module/firmware error
Configuration
TM Pulse 2x24V configuration software options:
● TIA Portal V13 + SP1 with HSP 0131 (Hardware Support Package from the Internet)
● STEP 7 version V5.5 + SP4 with HSP 0240
● GSD file links:
– PROFIBUS GSD files
– PROFINET GSD files
Firmware update
Firmware updates can be downloaded to the memory of the TM Pulse 2x24V module by
means of the STEP 7 TIA Portal software or the HW Config software.
Accessories
The following accessories can be used with the module and are not included in the product
package:
● Labeling strip
● Color identification labels
● Reference identification labels
A BaseUnit of the B1 type is required to operate the technology module. For an overview of
the BaseUnits to be used with the technology module, refer to the product information on the
documentation for the ET 200SP Distributed I/O System
(https://support.industry.siemens.com/cs/document/73021864?dti=0&lc=en-US).
For detailed information on the installation procedure, refer to the system manual for the
ET 200SP Distributed I/O System
(https://support.industry.siemens.com/cs/document/58649293?dti=0&lc=en-US).
Technology module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
Manual, 09/2015, A5E35061186-AA
(https://support.industry.siemens.com/cs/document/73016883?dti=0&lc=en-US)
(https://support.industry.siemens.com/cs/document/57138621?dti=0&lc=en-US)
Product overview
2.1 Properties
13