Keyboard; Power; Dtc Lookup - Autel AutoLink AL419 Manual

"$" -- Identifies the control module number from which data is
1)
retrieved.
2) "?" -- Indicates help or code breaker information is available.
3) "G" -- Indicates graphic viewing is available.

3.5 Keyboard

No solvents such as alcohol are allowed to clean the keypad or display.
Use a mild nonabrasive detergent and a soft cotton cloth. Do not soak
the keypad as the keypad is not waterproof.

3.6 Power

The scan tool is powered via the vehicle Data Link Connector (DLC).
Just follow the steps below to turn on the scan tool:
1) Connect the OBD II Cable to scan tool.
2) Find DLC on vehicle.

A plastic DLC cover may be found for some vehicles and you
need to remove it before plugging the OBD2 cable.
Plug OBD II cable to the vehicle‟s DLC.
3)

3.7 DTC Lookup

The DTC Lookup function is used to search for definitions of DTCs
stored in the DTC library and for code breaker information.
1) From Main Screen (Figure 3.1), use the UP/DOWN scroll button
and LEFT/RIGHT scroll button to select DTC Lookup and
press the OK button.
13