Autel AutoLink AL419 Manual page 18

In this menu, you could configure the monitors required to test spark
ignition and compression ignition, the number of monitors to pass
diagnosis, and restore the default settings.
1) Spark IGN Required Monitors
From Configure Monitors screen, use the UP/DOWN scroll button to
select Spark IGN Required Monitors, and press the OK button.
The monitors for spark ignition engines show as below:
√
√
√
√
√
2) Compression IGN Required Monitors
From Configure Monitors screen, use the UP/DOWN scroll button to
select Compression IGN Required Monitors, and press the OK
button.
The monitors for compression ignition engines show as below:
Configure Monitors
Spark IGN Required Monitors
Compression IGN Required Monitors
Allowed INC Monitors
Reset Factory Default
Figure 3.5
Spark IGN Required Monitors
MIS
FUEL
CCM
CAT
HCAT
√
√
√
√
√
17
1/4
?
EVAP
AIR
O2S
HTR
EGR