Autel AutoLink AL419 Manual page 40

 The number "x" to the upper right corner of the screen
indicates sequence of highlighted item; and "#x" are the order
that the parameters are selected and will be displayed.

If you want to deselect all marked items or select all items,
press the LEFT button. A message comes up to ask for your
confirmation.

If you decide to deselect these items, press OK; if you decide
not to, press ESC or use the LEFT/RIGHT scroll button to
select NO to continue PID selections.
4) Press the OK button to view selected PIDs on screen.
..............Custom Data Set
 DTC_CNT
 FUELSYS1
 FUELSYS2
LOAD_PCT

 ECT
 SHRTFT1
Figure 5.17
..................Deselect
Deselect all
selected PID's?
YES
Figure 5.18
39
4/26
?
#01
All......................
NO