Autel AutoLink AL419 Manual page 43


The asterisk (*) icon on the screen indicates that there is a
previous recording in the memory location.

If you select a location marked with an asterisk (*) icon, a
message prompting to overwrite old recording displays.

If you wish to proceed with overwriting the old recording,
press the OK button; if you do not wish to overwrite it, use
the LEFT/RIGHT button to select NO or press the ESC
button to pick another memory location.
4) Observe on-screen instructions.

If Manual Trigger is selected, following screen shows:

If DTC Trigger is selected, following screen shows:
Select Memory
A previous recording
exists! Do you want
to overwrite it?
YES
Figure 5.23
...............Manual
Ready to record!
Press [ENTER] to
start recording...
Press [ESC] to exit
Figure 5.24
42
...
NO
Trigger..................