Table of Contents
Advertisement
1. Technical service
For periodic maintenance checks and repairs, contact your nearest Support Centre and only use original
spare parts. Failure to comply with this provision shall forfeit the warranty right.
2. General information
It is essential for this instruction manual to be stored together with the appliance for future referencing; in
the event of misplacing it, a copy must be obtained directly from the manufacturer.
This information has been prepared for your safety and that of others; therefore we kindly ask you to read it
carefully before installing and using the appliance.
Upon reception of the goods, if the packaging is not intact or is damaged, report the following:
"GOODS
with the specification of the damage and countersigned by the driver; file a written
SUBJECT TO INSPECTION",
complaint with the vendor within 4 calendar days (not business days) from the date of delivery, after which
no complaints shall be accepted.
The appliance is intended for professional use in industrial and professional kitchens and must only be used
by skilled personnel who have been trained on its proper use. For safety reasons the appliance must be
supervised during operation.
The appliance is not intended to be used by children and/or persons with impaired physical, sensory or
mental abilities, or who lack experience or knowledge, unless they are supervised by a person responsible for
their safety, or who has been instructed on using the appliance.
It is hazardous to modify or attempt to modify the features of this appliance.
The appliance must never be cleaned with direct water or steam jets, since any infiltration of water might
affect its safety.
Before maintenance or cleaning disconnect the appliance from the power supply mains and let it cool.
In the event of failure or poor operation, switch off the appliance, close the water supply cock, disconnect
the power supply and contact an authorised Support Centre.
Any modification to the electrical system that might be required to install the appliance must be carried out
by competent personnel only.
All installation and commissioning operations must exclusively be performed by technically skilled installers,
according to the manufacturer's instructions and in compliance with national standards in force.
Note: The inappropriate or incorrect use and failure to comply with installation rules shall invalidate any
Manufacturer liability. To this regard, the instructions provided in the
"POSITIONING" paragraph must be strictly
complied with.
2
Hide quick links:
Advertisement
Table of Contents
