Calling Line Identification Presentation - Yealink SIP-T2XP Administrator's Manual

Administrator's Guide for SIP-T2xP IP Phones
7. Click OK to reboot the IP phone.
To configure web server type via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin)
->Network->Webserver Type.
2. Press
Status field.
3. Enter the HTTP port number in the HTTP Port field.
4. Press
Status field.
5. Enter the HTTPS port number in the HTTPS Port field.
6. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of
time.

Calling Line Identification Presentation

Calling line identification presentation (CLIP) allows IP phones to display the caller
identity, derived from a SIP header contained in the INVITE message when receiving an
incoming call. IP phones support deriving caller identiry from three types of SIP header:
From, P-Asserted-Identity and Remote-Party-ID. Identity presentation is based on the
identity in the relevant SIP header.
If the caller has existed in the local directory, the local name assigned to the caller
should be preferentially displayed.
Procedure
CLIP can be configured using the configuration files or locally.
Configuration File
Local
To configure the presentation of the caller identity via web user interface:
116
or , or the Switch soft key to select the desired value from the HTTP
or , or the Switch soft key to select the desired value from the HTTPS
<MAC>.cfg
Web User Interface
Configure the presentation of
the caller identity.
For more information, refer to
Calling Line Identification
Presentation on page 310.
Configure the presentation of
the caller identity.
Navigate to:
http://<phoneIPAddress>/servl
et?p=account-adv&q=load&a
cc=0